GENERAL PLUMBING SERVICES

Common Plumbing Issues & Repairs

LEAKY PIPE REPAIR

Leaky pipes can be a common household issue that causes frustration and potential damage if not addressed promptly. Fortunately, there are several methods you can use to repair a leaky pipe depending on the severity of the leak. For minor leaks, you can try using a pipe repair clamp or wrap it with a rubber patch. For more serious leaks, it may be necessary to cut out the damaged section and replace it with a new piece of pipe.

By taking swift action to repair leaky pipes, you can prevent further damage and maintain a functional and efficient plumbing system in your home.  

When dealing with a clogged drain, there are several methods you can try to fix the issue. One common approach is to use a mixture of baking soda and vinegar. Start by pouring boiling water down the drain to help loosen up the blockage. Then, pour half a cup of baking soda followed by half a cup of vinegar. Cover the drain and let it sit for about 30 minutes before flushing it with hot water.

Another method is to use a plumber's snake, also known as a drain auger, to physically remove the clog. Insert the snake into the drain and twist it to break up or pull out the blockage. Be sure to follow the manufacturer's instructions carefully to avoid damaging your pipes.

If these DIY methods don't work, you may need to consider calling a professional plumber to assess and fix the clog. Remember, it's important to address a clogged drain promptly to prevent further damage and ensure proper drainage in your home.

A running toilet can be a frustrating issue to deal with, but fear not, as there are some simple steps you can take to fix it. The most common reason for a running toilet is a faulty flapper valve that is not sealing properly. To fix this, first, turn off the water supply to the toilet. Next, remove the tank lid and locate the flapper valve. Check if it is worn out or covered in mineral deposits. If so, replace it with a new one.

Another possible cause of a running toilet is a faulty fill valve. To check this, flush the toilet and observe if the water stops filling at the right level. If it doesn't, you may need to adjust or replace the fill valve.

Additionally, check for any leaks in the toilet tank or bowl that may be causing the running water. You can do this by adding a few drops of food coloring to the tank water and checking for any colored water seeping into the bowl without flushing.

By following these steps and troubleshooting the common issues causing a running toilet, you can easily fix the problem and restore peace and quiet to your bathroom.

Low water pressure can be a common and frustrating issue in many households. There are several possible reasons for this problem, but the good news is that there are also various solutions to help fix it. Here are a few steps you can take to improve your water pressure:

1. Check for any leaks in your plumbing system. Leaks can lead to a loss of water pressure, so it's important to inspect your pipes, faucets, and fixtures for any signs of leakage.
2. Clean your showerhead and aerators. Over time, mineral deposits can build up and clog the openings, reducing water flow. Soaking your showerhead and aerators in vinegar can help dissolve these deposits and restore water pressure.
3. Verify that your shut-off valves are fully open. Sometimes, the shut-off valves under sinks or behind toilets may not be fully open, leading to decreased water pressure. Make sure these valves are fully turned on. The pressure regulating valve is a crucial component in maintaining optimal water pressure in your plumbing system. If you are experiencing low water pressure, it may be due to issues with the valve.

Remember, safety should always be a top priority when dealing with plumbing issues. If you're unsure about how to repair a leaky pipe, low water pressure, clogged drain or running toilet, it's best to contact Mr Flow Plumbing at (410) 246-1992 or contact us online to book an appointment. We will quickly resolve the issue and ensure your plumbing system is in good working condition.